Electrolytic Jig Cleaning Powder

BL-11 Electrolytic Peeling Powder For Hanger

Detailed introduction

BL-11 Electrolytic Peeling Powder For Hanger	1. Its powder form features in low concentration in start up requirement and consumption less, therefore cost lower and also easily control. 2. The electrolyte has good conductivity, and peeling speed is quick. 3.pH value stable with less change, no need adjust. 4. It does not contain amine salt, makes easier water treatment to its drain; Retrieving of deposition by filtration can be adpoted due to less sludge. 5. It does not harm to the insulation rubber on the jig and therefore help to extend the jig's service life.	Composition	Range	Unit
		BL-11	80-120	g/L
		Temperature	30-70	°C
		Current Density	10-30	A/dm2
		PH Value	6-8	°C
		Cathode Material	304 Stainless Steel
		Peeling Rate	20um/min.20A/d㎡
		Baume	6-8	Be

prev：nothing
next：nothing